Why is my FujiFilm Film Camera picture not sharp?
There are several reasons why your FujiFilm Film Camera picture might not be sharp: * If you were closer than 1.0 m (3.3 ft.) to the subject, move further away. * The lens may be dirty, so try cleaning it. * The camera might have been moving when you took the picture. Hold the camera firmly and gently press the shutter release button.
What to do if the shutter release won’t trip on my FujiFilm CLEAR SHOT 20 DATE?
If the shutter release won’t trip on your FujiFilm Film Camera, consider the following: * If the lens cover is closed, open it to turn on the power and set the camera to the ready-to-shoot state. * If the flash ready lamp hasn't lit up 20 seconds after turning on the power or tripping the shutter release, replace the batteries. * If all film frames have been exposed, remove the film and load a fresh roll.
Why are my FujiFilm CLEAR SHOT 20 DATE pictures too dark?
Your FujiFilm Film Camera pictures might be too dark because: * The subject was too far for flash photography in a dark place. Ensure you shoot within the specified coverage distance of the electronic flash. * Your finger might have been covering the flash. Make sure not to obstruct the flash with your finger.
What to do if the film rewound during photographing with my FujiFilm CLEAR SHOT 20 DATE Film Camera?
If the film rewound while you were taking pictures with your FujiFilm Film Camera, it might be because you moved the film rewind switch accidentally. Avoid moving the film rewind switch when film is loaded in the camera.
What to do if the camera back won’t close on my FujiFilm CLEAR SHOT 20 DATE Film Camera?
If the camera back won’t close on your FujiFilm Film Camera, check if the film cassette is straight. Straighten the film cassette, then try closing the camera back.
What to do if the exposure counter does not advance after loading film in my FujiFilm Film Camera?
If the exposure counter on your FujiFilm Film Camera doesn't advance after loading film, ensure that you have loaded the film correctly.
Why is the printed date/time incorrect on my FujiFilm CLEAR SHOT 20 DATE Film Camera?
The printed date/time might be incorrect on your FujiFilm Film Camera because you didn’t set the correct date and time after replacing the batteries. Set the date and time after replacing the batteries.
Why isn't the date printed on the front of my FujiFilm Film Camera pictures?
The date may not be printing on your FujiFilm Film Camera pictures if: * "- - - - - -" was selected before taking pictures. Choose a date mode other than “- - - - - -” before taking pictures. * There is something light-colored where the date appears. Try to arrange that there is nothing light-colored where the date appears.
General| Film Format | 35mm |
|---|---|
| Flash | Built-in |
| Date Imprint | Yes |
| Power Source | 2 x AA batteries |
| Focus | Fixed focus |
| Film Advance | Automatic |
| Type | Point & Shoot |
| Shutter Speed | 1/125 sec |
How to secure the carrying strap to the camera body.
Instructions for inserting the correct alkaline batteries for camera operation.
Steps to activate the camera by uncovering the lens and checking the flash ready lamp.
Procedure for setting the year, month, day, hour, and minute on the camera.
How to choose the format for date/time imprinting on photographs.
Guide to inserting 35mm film, understanding DX coding, and film loading precautions.
Explanation of the viewfinder's bright frame lines for composing pictures.
Basic steps for operating the camera, including test shots and flash readiness.
Instructions and explanation for using the red-eye reduction feature during flash photography.
Procedures for rewinding exposed film and safely removing it from the camera.
To Next Page