FGS-406106-FG
BL00403-200
(
1
)
E
A. Loading the batteries
1.Check that the camera is
turned off (viewfinder
lamp is off) before
opening the battery cover.
1 Hold down the Battery
cover lock release
button.
2 Open the battery
cover.
2.Load the batteries
correctly as shown left.
1.Align the gold mark on the
xD-Picture Card slot with
the gold contact area on
the xD-Picture Card and
then push the card firmly
all the way into the slot.
3.Press the “POWER”
button to turn the camera
on. When turning the
camera on, the viewfinder
lamp lights green.
B. Setting up the camera
1
2.Close the battery cover.
2
1
2
C. Taking a picture
1.Set the Mode switch to “q”.
2.Press the shutter button down half
way to adjust the focus.
3.
Press the shutter button down fully to
take a picture. The camera makes a
“Click” sound and takes the picture.
D. Viewing a picture
1.Set the Mode switch to
“
w”.
2.Press the “d” or “c” to
move through your
images.
4.You can select your
preferred date format.
Press “d” or “c” to select
the date order, Year,
Month, Day, Hour or
Minute.
Press “a” or “b” to correct
the setting.
Press the “MENU/OK”
button after you complete
the setting.
*
Refer to owner’s manual
for date/time setup.
1
2 3
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix E500/FinePix E510
You can use this camera to view still images recorded on the FinePix
E500/FinePix E510 or still images (excluding some uncompressed
images) recorded on a FUJIFILM digital camera that supports xD-
Picture Card.
To Next Page
Need help?
General
