To Next PageTo Next Page
Need help?Do you have a question about the FujiFilm FUJI DRI-CHEM NX600 and is the answer not in the manual?
General| Brand | FujiFilm |
|---|---|
| Model | FUJI DRI-CHEM NX600 |
| Category | Measuring Instruments |
| Language | English |
Provides essential precautions to follow before and during equipment operation for safety.
Details safe handling and disposal procedures for waste generated during analyzer use.
Outlines precautions to avoid electrical shock, including grounding and cable connections.
Instructs immediate actions to take when unusual noise, smell, or smoke occurs, including contacting the dealer.
Identifies and illustrates the main physical components of the FDC NX600 analyzer.
Lists all consumables and optional items available for the FDC NX600, including chemicals.
Provides a high-level overview of the measurement process, divided into preparation and execution steps.
Guides through the standard measurement procedure, including checking the LCD, setting tips, and loading samples.
Explains how to view and interpret measurement results, including reference interval indications.
Details the process for performing calibration for CRP measurements, including prerequisites and steps.
Explains how to use the PF for filtering plasma from whole blood samples without a centrifuge.
Explains how to automatically import patient IDs and sample information from a host PC using DMS.
Guides on how to replenish and load tips into the tip rack.
Details how to prepare and load diluent for dilution and CRP measurements.
Details procedures for inspecting and cleaning critical internal components affected by sample stains.
Details the procedure for replacing and cleaning the light source lamp, including safety precautions.
Details how to clean the slide reading section to resolve slide-detection errors caused by dust or soiling.
Guides on troubleshooting discrepancies in control fluid measurement results and when to contact the dealer.
Explains how error messages are displayed on the LCD, including error codes and additional information.
Provides a comprehensive table listing error codes, their descriptions, and corresponding reference sections for troubleshooting.
Lists common errors related to the sampler, including tip mounting, detection, clogging, and ejection issues.
Provides access to advanced settings and configuration options for administrators.
Explains how to enter lot compensation coefficients (c, d, e) from QC cards when direct reading is not possible.
Explains how to configure dilution factors and diluent positions for various measurement items and sample types.
Explains how to transmit measurement results to a host computer via software and cable.
Details the process of inputting an Operator ID to activate measurement or mode functions.
Provides access to USM functions like importing, exporting, and editing operator and emergency IDs.
Details the required environmental conditions for proper analyzer operation.
Defines the analyzer's service life and the conditions under which it is valid.
Provides a list of abbreviations and their meanings used in display and printout messages.
