To Next PageTo Next Page
Need help?Do you have a question about the FujiFilm FCR CAPSULA X and is the answer not in the manual?
General| Spatial Resolution | 10 pixels/mm |
|---|---|
| Power Requirements | 100-240V AC, 50/60Hz |
| Type | Computed Radiography (CR) System |
| Grayscale Resolution | 16 bits |
| Grayscale | 16-bit (65, 536 shades of gray) |
| Image Plate Size | 14x17 inches |
| Weight | Approximately 110 lbs (50 kg) |
| Connectivity | Ethernet |
Explains notation for warnings, cautions, notes, and references.
General safety precautions related to power supply, drive mechanism, heavy objects, safety devices, and grounding.
Precautions to avoid laser exposure during specific procedures and general warnings.
Addresses additional protective grounding and definitions of patient, medically-used, and non-medically used rooms.
Precautions for retaining the machine, especially when using long cassettes.
Illustrates attachment locations of laser precaution labels per standards.
Specifies Class 1 Equipment for electrical shock protection.
Details EMC compliance with medical device directives and potential interference issues.
Details product code, available IP sizes and types.
Provides physical dimensions, weight, and center of gravity information.
Details frequency, input voltage, rated amperage, power consumption, grounding, and overload protection.
Describes basic system configuration examples, including network connections.
Details symbols, names, types, and functions of sensors and solenoids in the Cassette Set Unit.
Illustrates the power supply system block diagram.
Lists error codes, their names, occurrence conditions, and analysis flow.
Explains how to interpret RANK, REF. NO., PART NUMBER, QTY., REMARKS, SERIAL NUMBER, and REFER TO columns.
Lists preventive maintenance programs by year/process count intervals.
Lists detailed maintenance procedures, including log backup, error log checks, and erasure lamp time.
Procedures for removing and cleaning various components within the Subscanning Unit.
Procedure to confirm the S value related to radiation dose.
Provides a step-by-step workflow for the installation process.
General precautions for installation site requirements.
Steps to start the Machine Maintenance Utility.
Procedure for setting the RU's IP address.
Steps to verify the network connection between RU and CR Console.
Detailed checks for image quality and IP conveyance.
