115
5
Taking Photographs
Bracketing
V WHITE BALANCE BKT
Select a bracketing amount (±1, ±2, or ±3) in the drive mode dis-
play. Each time the shutter is released, the camera takes one shot
and processes it to create three copies: one at the current white
balanced setting, one with ne-tuning increased by the selected
amount, and another with ne-tuning decreased by the selected
amount.
s Bracketing
O AE BKT
Use A SHOOTING SETTING> AE BKT SETTING to choose the
bracketing amount, bracketing order, and number of shots. The
camera will take the speci ed number of shots in sequence: one
using the metered value for exposure and the others over- or
under-exposed by multiples of the selected bracketing amount.
N
Regardless of the bracketing amount, exposure will not exceed the
limits of the exposure metering system.
X FILM SIMULATION BKT
Each time the shutter is released, the camera takes one shot and
processes it to create copies with di erent lm simulation settings,
chosen using
A
SHOOTING SETTING> FILM SIMULATION BKT.
Y DYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three
shots with di erent dynamic ranges: 100% for the rst, 200% for
the second, and 400% for the third.
N
While dynamic range bracketing is in e ect, sensitivity will be restricted
to a minimum of ISO640; the sensitivity previously in e ect is restored
when bracketing ends.
To Next Page
