FujiFilm X-T30 User Manual

277
Technical Notes
12
Cleaning the Image Sensor
Dust that cannot be removed using D USER SETTING>
SENSOR CLEANING can be removed manually as de-
scribed below.
O
Note that there will be a charge to repair or replace the image sensor
if it is damaged during cleaning.
1
Use a blower (not a brush) to remove
dust from the sensor.
O
Do not use a brush or blower brush.
Failure to observe this precaution
could damage the sensor.
2
Check whether the dust has been successfully removed. Re-
peat Steps 1 and 2 as necessary.
3
Replace the body cap or lens.

FujiFilm X-T30 Specifications

General

Megapixels	26.1 MP
Autofocus Points	425
Weight	383 g (including battery and memory card)
Processor	X-Processor 4
Battery	NP-W126S Li-ion battery
Dimensions	118.4 x 82.8 x 46.8 mm
Wireless Connectivity	Wi-Fi, Bluetooth
Sensor	APS-C X-Trans CMOS 4
ISO Range	160-12800 (expandable to 80-51200)
Continuous Shooting Speed	8 fps (mechanical shutter), 20 fps (electronic shutter)
Video Resolution	4K/30p
Viewfinder	0.39" OLED, 2.36M dots
Screen	3.0-inch tilting touchscreen LCD, 1.04 million dots
Battery Life	Approx. 380 shots
Shutter Speed	1/4000 sec (mechanical shutter), 1/32000 sec (electronic shutter)
Storage Media	SD/SDHC/SDXC (UHS-I)