Fujiiryoki HWP-77EN - Page 12

12
Introduction
Name of each part
<Corporation stop>
● Corporation stop tightening cap ・・ Fixes corporation stop to water tap.
●Packing
・・・・・・・・・・・・・・・・・・・・・・・・・・・ Prevents water leak from the connection parts of the corporation
stop and water tap.
●Metal mesh
・・・・・・・・・・・・・・・・・・・・・・ When the metal mesh has clogged with contaminants, water
quantity decreases. If water quantity of “tap water” and “ionized
water and purified water” decreases, or after use for a long time
(6 months or longer), remove contaminants which have
accumulated in the metal mesh with a toothbrush or a similar object.
●Water selection lever
・・・・・・・・・・・ Allows to select from “Ionized water and purified water(Ion),”
“Tap water shower( )” or “Tap water straight(Raw).”
●Pressure valve
・・・・・・・・・・・・・・・・・・ This valve opens to discharge water when water pressure in
the main body is excessively high. (Approximately 500kPa)
When water comes out of the pressure valve, choke the cock of
the water tap because water pressure is excessively high.
●Hot water discharge port
・・・・・・ When the lever is set to “Ion” side hot water is discharged
 LIKRWZDWHURI&RUKLJKHUIORZV
●Hose connection port
・・・・・・・・・・ Connect the water supply hose.
●Hose tightening cap
・・・・・・・・・・・・ Fixes the water supply hose to the hose connection port.
●How to use the water selection lever
●
●
●
When using “Ionized water
and purified water”
When using “Tap water straight”
Corporation stop
tightening cap
●
Packing
●
Metal mesh
Water selection
lever
●
Hose connection port
Hose tightening cap
●
Functions
Pressure valve
●
Hot water discharge
port
When using
“Tap water shower”
●
●
●
“ Ion ”
“ ”
“ Raw ”