Fujimoto CP-31 User Manual

CP31MANUAL CONTENTS
http://www.fiijimoto-photo.co.jp/iipi_e/31e_manu/contents.htm
fujimoto
IMAGE
PROCESSOR
CP-31
OPERATION
MANUAL
ii ro Sere are
carbon swspesiK -pr
AS Ktafai :if».ti in mcfes is i
•••.,•!'" •..;".:• vi:>;••.... sEaintess ste-fti ar TKsiniM«:
\S:x':V..X, ' -•-, 'vSKfreiSsiarcie scrsasior:
,.--''' ,.*:&H^-^S?^. "/-•••..
..•;;;'•£;
isars - vaiy r*siss.at*.
j cJan
:^X /
ar*3 ssriai rang* ••-;™*>^:^^
Thank you for your purchase of The Fujimoto CP-31 Image processor.
Before attempting to operate this equipment, please read all of the information
contained in this manual carefully. This will help the equipment demonstrate its
performance and ensure its long-term service.
Since the CP-31 uses chemical solutions, daily maintenance is essential for proper
operation.
"Caution never turn on the unit without full solution trays"
Turning the unit on when dry will cause serious damage.
Contents
CP-31 FEATURES
CP-31 SPECIFICATIONS
PARTS DESCRIPTION
INSTALLATION
THE CONTROL PANEL
THE CONTROL BOX
INITIAL SET-UP AND OPERATION
PREOPERATION CHECK AND CLEANING OF BATH
SETTING THE SOLUTION TEMPERATURE
SETTING THE TRANSPORT SPEED
TEST RUN
I of 2
15/06/2007 12:28 PM

Fujimoto CP-31 Specifications

General

Model	CP-31
Manufacturer	Fujimoto
Power	300W
Output Voltage	+3.3V, +5V, +12V, -12V, +5Vsb
Type	Power Supply
Input Voltage	100-240V
Input Frequency	50/60Hz
Dimensions	150mm x 140mm x 86mm