Fujimoto CP51 User Manual

> Home D
> Home GB
> Service
> Back
| E-Mail Formular | Webmaster | Impressum | ©JOBO AG
Service Analog
Instruction Manual
for the Fujimoto CP51
Roller Transport Processor
Index
Introduction
It is important to read completely through the following instructions before using the processor. Although the machine is
easy to use, there are important aspects of it which may not be obvious without learning of them in this manual.

Fujimoto CP51 Specifications

General

Brand	Fujimoto
Model	CP51
Category	Computer Hardware
Language	English

Summary

Main Body

CP51 Processor Unpacking Guide

Guide on how to remove and inspect the CP51 processor from its packaging.

CP51 Main Body Technical Specifications

Details the technical specifications of the CP51 Main Body, including paper compatibility.

CP51 Pre-Installation Setup Conditions

Outlines the environmental requirements and conditions for setting up the CP51 processor.

CP51 Installation Process

Step-by-step instructions for installing the CP51 processor and its modules.

Loading MB Chemicals for Operation

Instructions on how to load chemicals into the Main Body of the CP51 processor.

CP51 Troubleshooting Common Issues

Provides solutions for common issues encountered with the CP51 processor.

CP51 Processing Data and Speeds

Details processing times and transport speeds for optimal print development.

Stabilize / Dry Module

CP51 S/D Module Specifications

Technical specifications for the Stabilize/Dry Module.

S/D Module Installation Guide

Step-by-step guide for installing the Stabilize/Dry Module.

S/D Module Testing for Operation

Procedures for testing the Stabilize/Dry Module after installation.

S/D Module Preparation for Operation

Steps to prepare the Stabilize/Dry Module for operation.

S/D Module Maintenance Guide

Guidelines for maintaining the Stabilize/Dry Module.

Wash / Dry Module

CP51 W/D Module Specifications

Technical specifications for the Wash/Dry Module.

W/D Module Installation Guide

Step-by-step guide for installing the Wash/Dry Module.

W/D Module Testing for Operation

Procedures for testing the Wash/Dry Module after installation.

W/D Module Preparation for Operation

Steps to prepare the Wash/Dry Module for operation.

W/D Module Maintenance Guide

Guidelines for maintaining the Wash/Dry Module.