Fujioh BUF-03A - Replacing the Light Bulb; Bulb Specification; Light Bulb Replacement Procedure

8
replacing the light bulb
One 50W halogen light bulb can be installed in this range hood.
Prior to replacing the light bulb, purchase a halogen light bulb (Bulb type MR16, GU10),
rated 120V - 50W or below.
Halogen lamp
Push the lamp,
and turn it
counter clockwise.
Push the lamp,
and turn it
clockwise.
Halogen lamp
(MR16, GU10: 50W)
To remove the light bulb, push and turn it counterclockwise. Then, replace the light bulb
with a new one.
NOTE:
• When replacing the bulb, wait until it has cooled off before removing, or you may burn
your hand.
• When installing the bulb, be sure to fix to the socket securely.


 To remove the light bulb


 To install the light bulb