FibreCAT SX40
Data Sheets: http://www.fujitsu-siemens.com/storage
Model Description Details
Code
End User Price (£)
Comments
Base unit configurations
FibreCAT SX40
FibreCAT SX40 SAS Disk Subsystem 19" rack mountable storage expansion unit (2U) for 12 hot replace SAS HD
incl. rack mounting kit,1x SAS input/output module and redundant hot plug
power supplies with power cords.
S26361-K1122-V200 1421
The FibreCAT SX40 SAS storage subsystem is a passive, directly connectable system for data storage or expanding the hard disk capacity o
connected PRIMERGY servers. With a height of 2U, the FibreCAT SX40 subsystem meets the requirements for a compact design with high hard
disk capacity in 19-inch rack infrastructures.Up to 12 SAS hard disks offer a total maximum capacity of 3.6 Tbytes in an external housing.
Cascading of up to 3 FibreCAT SX40s via the second SAS x4 link permits expansion to a maximum of 10.8 Tbytes of external hard disk
capacity.
In the FibreCAT SX40 storage subsystem, the active components – hot-plug hard disks and hot-plug power supply modules – can be replaced
while the server is running. The redundant hot-plug power supply units can be connected with phase redundancy via separate power lines.
Optimum and secure cooling of the hard disks is ensured by 2 independent fans in each power supply unit.
Fujitsu Siemens Computers Price book November 7th 2007
To Next Page