z
When the cable is buried in the wall
● Remove the material (thinner than the surrounding material) in the wiring hole in the remote
sensor using a pair of cutters.
● Drill a hole in the wall for the cable.
● Seal the area around the cable penetration with putty.
13/16 (20) 13/16 (20)
ø1/4 (6)
- ø3/8 (10)
1/16 (1)
Screw
[M4 × 5/8(16)]
Mounting hole dimensions
Unit : in. (mm)
Finish
● Fit the cover on the remote sensor and screw it in place.
DIMENSIONS
2-3/16 (55.2)
2-3/4 (70.2)
PACKING LIST
Name and shape Quantity
Application
Installation manual
1
Cable [33 ft. (10 m)]
1
Screw
(M4 × 16 mm)
2
Screw
(M4 × 10 mm)
2
Cord clamp
1
SPECIFICATIONS
Model name UTY-XSZX
Dimensions [H × W × D]: in. (mm) 2-3/4 × 2-3/16 × 11/16 (70.2 × 55.2 × 18)
- (05 - 101) -
CONTROL
SYSTEM
CONTROL
SYSTEM
To Next Page
Loading...
