Fujitsu Airstage ASUB24TLAV1 - Page 745

8)Touch the [Setting] on the “Function Setting”
screen.
[002–01]
[30]
[00]
Address
Function No.
Setting No.
Function Setting
Back Setting
*1
NOTE:
*1 When All is chosen by 5), and di󰀨erent set up
"Setting No." from two or more indoor units, [-]
is displayed on "Setting No."
9) Setting screen of “Setting No.” is displayed.
Set the Setting No. with the [▲] or [▼].
01
[002–01]
[30]
Function Setting
Cancel OK
Address
Function No.
Setting No.
Ex.) Function number: 30, Setting number: 01
When the [OK] is touched, the “Function Setting”
verication screen is displayed.
10) Touch the [YES] of the verication screen.
No Yes
Function Setting
Function setting will be performed. OK?
In case of OK
[002–01]
[30]
[01]
Address
Function No.
Setting No.
Function Setting
Back Setting
When the data was normally set up on the indoor unit
In case of ERROR
[002–01]
[30]
[ – ]
Address
Function No.
Setting No.
Function Setting
Back Setting
● When the data was not set up on the indoor unit ( [-]
is displayed.)
● Set up the data again according to the procedure in
step 6) to 9) above

FUNCTION DETAILS
Refer to 2-8. FUNCTION DETAILS.
- (07 - 98) -
FUNCTION SETTING FUNCTION SETTING