Fujitsu AOYG54LBTA User Manual

- 70 -
DUCT TYPE ARYG12-54LHTBP
6. Touch the “Setting” on the “Function Setting” screen.
7. Setting screen of “Setting No.” is displayed. Set the setting number by touching ▲ or ▼. (The
setting range is from 00 to 99.) When the “OK” is touched, the “Function Setting” verification
screen is displayed.
8. When the “Back” on the “Function Setting” screen is touched, the display returns to the “Main-
tenance” screen.
9. After completing the function setting, be sure to turn off the power and turn it on again.
!
CAUTION
After turning off the power, wait 30 seconds or more before turning on the power again. The
function setting will not become active unless the power is turned off then on again.
[002–01]
[11]
[00]
Address
Function No.
Setting No.
Function Setting
Back Setting
00
[002–01]
[11]
Function Setting
Cancel OK
Address
Function No.
Setting No.
Example: When configuring the setting number of filter sign.
[002–01]
[11]
[00]
Address
Function No.
Setting No.
Function Setting
Back Setting

Fujitsu AOYG54LBTA Specifications

General

Brand	Fujitsu
Model	AOYG54LBTA
Category	Air Conditioner
Language	English