Fujitsu ARTG60LHTA User Manual

En-13
4
For [Temp. setting], select mode with the [Cursor but-
ton (Up/Down)] and press the [Enter button].
Adjust [Lower] and [Upper] value with the [Cursor but-
ton (Up/Down)].
With the [Cursor button (Left/Right)], the cursor can be
switched [Lower] and [Upper].
To complete the setting, press the [Enter button].
Set temp. range
Enable/Disable setting
Temp. setting
Cool/Dry
Heat
Auto
Lower
Upper
18
°
C
30
°
C
30
°
C
30
°
C
16
°
C
18
°
C
Enable
Mo 10:00
Set temp. au...
Air flow dire...
OK:
Cancel:
Notes
• Possible temperature setting ranges in the operation
modeareasfollows:
Cool, Dry, Auto ................ 18to30°C(64to88°F)
Heat ................................. 16to30°C(60to88°F)
• If the temperature out of the Set temp. range limitation
is set, it will be reset at the nearest temperature within
the range.
• Even if the temperature setting change is done on the
secondary remote controller, it returns to temperature
within the range set in [Set temp. range] on the
primary remote controller.
When you return to the “Monitor” screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Menu
Cool
Monitor
Mo 10:00
High
°
C
26
Set temp. range
End :
4. TIMER SETTING
4-1. Switching to the “Timer” screen
1
In “Menu” screen, select [Timer] with the [Cursor button
(Up/Down)], and press the [Enter button].
Menu
Function
Timer
Submenu
Mo 10:00
Setting:
Back:
2
“Timer” screen is displayed. To return to the “Menu”
screen, press the [Cancel button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
4-2. Timer setting items
4-2-1. On timer setting
1
In “Timer” screen, select [On timer] with the [Cursor
button (Up/Down)], and press the [Enter button].
Function
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Disable
Disable
Disable
Mo 10:00
Disable
Setting:
Back:
2
“On timer” screen is displayed.
On timer
Enable/Disable setting
Time setting
Disable
0.5 hour later
Mo 10:00
Auto-off timer
Off timer
Setting:
Back:
To change the setting, select the item with the [Cursor
button (Up/Down)], and press the [Enter button].
9374379866_OM_EN.indd 13 17/12/2014 13:19:28

Fujitsu ARTG60LHTA Specifications

General

Brand	Fujitsu
Model	ARTG60LHTA
Category	Air Conditioner
Language	English