Need help?Do you have a question about the Fujitsu AST30PBA and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R32 |
| Weight (Indoor Unit) | 9 kg |
| Type | Split System |
| Noise Level (Outdoor) | 50 dB |
Unit begins automatic operation in Heating, Cooling or Monitor modes based on room temperature.
Automatically adjusts thermostat and turns off unit after set time.
Allows convenient control of air conditioner operation.
Three-dimensional control over air direction swing using dual UP/DOWN and RIGHT/LEFT flaps.
The indoor unit's intake grille can be removed for easy cleaning.
Air filter treated to resist mildew growth for cleaner use.
Reduces indoor unit airflow for quieter operation.
Optional filter uses electrostatic principle to clean air.
Instructions for loading batteries into the remote control unit.
Steps to set the current time on the remote control unit.
Guide to selecting operating modes like AUTO, HEAT, COOL, DRY, FAN.
Instructions for adjusting the temperature setting using SET TEMP. buttons.
Steps to adjust fan speed through AUTO, HIGH, MED, LOW, QUIET options.
How to stop the air conditioner operation.
Instructions for setting ON or OFF timers for the air conditioner.
Guide to setting a sequence of ON and OFF timers.
Procedure to set the sleep timer length and operation.
Instructions for modifying existing sleep timer settings.
Instructions for operating the air conditioner using the main unit's control panel.
How to adjust the up-down airflow direction using the remote control.
How to adjust the right-left airflow direction using the remote control.
Procedure to activate vertical airflow swing.
Procedure to activate horizontal airflow swing.
Steps to remove and clean the intake grille.
Instructions for removing, cleaning, and replacing the air filter.
Information on installing and using the optional air cleaning filter.
Pre-service checks for common operating issues like no operation or poor performance.
Details on heating performance, automatic defrosting, and low ambient cooling.
How the unit restarts automatically after a power interruption.
Specifies the operating limits for cooling, dry, and heating modes.
To Next Page
