Fujitsu AST9UMBD - User Manual

20 pages

To Next Page

To Next Page

Loading...

KEEP THIS MANUAL

FOR FUTURE REFERENCE

FUJITSU GENERAL LIMITED

P/N9375339012

HEAT & COOL MODEL

(REVERSE CYCLE)

INDOOR UNIT

AST9UMBD

OUTDOOR UNIT

AOT19USCV2

COOLING MODEL

INDOOR UNIT

AST9FMBD

OUTDOOR UNIT

AOT19FSCV2

OPERATING MANUAL

ROOM AIR CONDITIONER

MULTI SPLIT TYPE

(2 ROOMS)

9375339012_OM_cover.p65 21/12/05, 9:591

Questions and Answers:

R
Randy BishopAug 19, 2025
Why is my Fujitsu AST9UMBD Air Conditioner not cooling well?
- S
  Sabrina JacksonSep 12, 2025
  If your Fujitsu Air Conditioner isn't cooling effectively, several factors could be responsible: a dirty air filter, blocked intake grille or outlet port, incorrect thermostat settings, open doors or windows, direct sunlight entering the room (for Cooling), the presence of heat-generating equipment or too many occupants (for Cooling), or the unit being set to SUPER QUIET operation. Check these aspects to improve cooling performance.
M
markmendozaAug 21, 2025
Why is water produced from the outdoor unit of my Fujitsu Air Conditioner?
- R
  Richard BrownAug 21, 2025
  Water may be produced from the outdoor unit of your Fujitsu Air Conditioner during Heating operation due to the Automatic Defrosting operation.
R
Robert TaylorAug 23, 2025
Why is my Fujitsu Air Conditioner not cooling or heating properly?
- G
  gerald10Aug 23, 2025
  Several factors can cause poor cooling or heating performance in your Fujitsu Air Conditioner. Check if the air filter is dirty, or if the air conditioner’s intake grille or outlet port is blocked. Ensure that the room temperature settings (thermostat) are correctly adjusted and that no windows or doors are open. For cooling operation, close the curtains if sunlight is entering the room and reduce the number of heat-generating appliances or people in the room. Also, check if the unit is set for SUPER QUIET operation.
M
michaelrangelAug 27, 2025
Why is water coming from the outdoor unit of my Fujitsu Air Conditioner?
- M
  Miss Natasha MartinAug 28, 2025
  During Heating operation, water may be produced from the outdoor unit of your Fujitsu Air Conditioner due to the Automatic Defrosting operation.
J
James MurrayAug 29, 2025
Why is my Fujitsu AST9UMBD airflow weak or stops?
- A
  albertmcphersonAug 29, 2025
  Weak or absent airflow in your Fujitsu Air Conditioner can occur for several reasons. When heating starts, the fan speed is temporarily low to warm internal parts. During heating, if the room exceeds the thermostat setting, the outdoor unit stops, and the indoor unit operates at low fan speed. The unit may also temporarily stop for 7-15 minutes for Automatic Defrosting, indicated by a flashing OPERATION lamp. Low fan speed is normal during Dry operation, when monitoring room temperature, or during SUPER QUIET or monitor AUTO operation.
M
Michael Stewart IISep 1, 2025
Why does my Fujitsu AST9UMBD Air Conditioner smell?
- G
  graymandySep 1, 2025
  The smell from your Fujitsu Air Conditioner may be due to room odors (furniture, tobacco, etc.) that have been drawn into the unit.
R
Roberto StevensonSep 3, 2025
Why is my Fujitsu AST9UMBD making noise?
- W
  whitebobbySep 3, 2025
  Your Fujitsu Air Conditioner may produce noise due to water flowing in the piping during or after operation. Also, the sound of coolant flowing may be noticeable for 2-3 minutes after starting. During heating, a sizzling sound may occur occasionally due to the Automatic Defrosting operation.
D
Donna SaundersSep 5, 2025
What to do if my Fujitsu AST9UMBD Air Conditioner unit operates differently from the remote control unit’s setting?
- K
  Kelsey PatelSep 5, 2025
  If your Fujitsu unit responds differently to the remote control settings, check if the remote's batteries are dead or loaded incorrectly.
F
Felicia DunlapSep 7, 2025
Why doesn't my Fujitsu AST9UMBD Air Conditioner operate immediately?
- W
  William ReynoldsSep 7, 2025
  If your Fujitsu Air Conditioner is stopped and immediately restarted, the compressor won't operate for about 3 minutes to prevent fuse issues. Also, if the power supply plug is disconnected and reconnected, the protection circuit will prevent operation for about 3 minutes.
R
Robert JohnsonSep 9, 2025
Why doesn't my Fujitsu Air Conditioner operate immediately after turning it on?
- G
  Gregory BrewerSep 9, 2025
  If your Fujitsu Air Conditioner doesn’t operate immediately after being turned on, it could be due to a built-in protection mechanism. If the unit is stopped and then immediately started again, the compressor will not operate for about 3 minutes to prevent fuse blowouts. Similarly, if the power supply plug is disconnected and then reconnected, the protection circuit will operate for about 3 minutes, preventing operation during that period.

Fujitsu AST9UMBD Specifications

General

Brand	Fujitsu
Model	AST9UMBD
Category	Air Conditioner
Language	English

Related product manuals

Preview: Fujitsu AST9UMAD

Fujitsu AST9UMAD

Fujitsu AST9RSHCW

Preview: Fujitsu AST9LSACW

Fujitsu AST9LSACW

Fujitsu AST9RSG-W

Preview: Fujitsu AST9PSACW

Fujitsu AST9PSACW

Fujitsu AST9 SERIES

Preview: Fujitsu AST24PBA

Fujitsu AST24PBA

Preview: Fujitsu ASTA09LCC

Fujitsu ASTA09LCC

Fujitsu ASTA18JCC