Need help?Do you have a question about the Fujitsu AST9RSG-W and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Unit Weight | 9 kg |
| Operating Temperature (Cooling) | -15 to 24 °C |
| Operating Temperature (Heating) | -15 to 24 °C |
Start the unit and select the desired operating mode (AUTO, HEAT, COOL, DRY, FAN).
Adjust the thermostat setting to the desired room temperature.
Select the fan speed from AUTO, HIGH, MED, LOW, or QUIET.
Steps to remove, clean, and replace the air filter.
Check common issues like no operation, noise, smells, mist, or weak airflow.
Further checks for non-operation, poor cooling/heating, or setting discrepancies.
To Next Page
