1-2. Outdoor unit
Type Inverter heat pump
Model name AOYG18KBTA3 AOYG24KBTA3
Power source 230 V 50 Hz
Available voltage range 198—264V
Standard combination of indoor unit
Wall mounted
ASYG07KMCC ×3
Wall mounted
ASYG07KMCC
ASYG09KMCC ×2
Capacity
Cooling
Rated
kW 5.4 6.8
Btu/h 18,400 23,200
Min.—Max.
kW 1.8—7 1.8—8.5
Btu/h 6,100—23,800 6,100—29,000
Heating
Rated
kW 6.8 8.0
Btu/h 23,200 27,300
Min.—Max.
kW 2.0—8.0 2.0—9.2
Btu/h 6,800—27,300 6,800—31,400
Input power
Cooling
Rated
kW
1.13 1.74
Max. 1.90 2.65
Heating
Rated 1.39 1.82
Max. 1.85 2.35
Current
Cooling Rated
A
5.1 7.7
Heating Rated 6.2 8.1
EER Cooling
kW/kW
4.78 3.90
COP Heating 4.89 4.40
Starting current A 6.2 8.1
Maximum operating current *
1
A 12.0 14.5
Fan
Type × Q'ty Propeller × 1
Airflow rate
Cooling
m
3
/h
2,220 2,270
Heating 2,160 2,730
Motor output W 49 49
Sound pressure level *
2
Cooling
dB (A)
46 48
Heating 49 53
Heat exchanger
Dimension (H x W x D)
mm
Main1: 672 × 881 × 18.19
Main2: 672 × 851 × 18.19
Fin pitch 1.3
Rows × Stages
Main1: 1 × 32
Main2: 1 × 32
Pipe type (Material) Copper tube
Fin type (Material) Aluminum
Compressor
Type DC twin rotary
Motor output W 1,200
Refrigerant
Type R32 (675)
Charge g 1,800
Refrigerant oil
Type RmM68AF
Amount
cm
3
550
Enclosure
Material Steel sheet
Color
Beige
(Approximate color of Munsell 10YR 7.5/1.0 NN)
Dimensions
(H x W x D)
Net
mm
716 × 820 × 315
Gross 890 × 1,027 × 445
Weight
Net
kg
46
Gross 56
Connection
pipe
Size
Liquid
mm (in)
Ø6.35 (Ø1/4) × 3
Gas Ø9.52 (Ø3/8) × 3 Ø9.52 (Ø3/8) × 2, Ø12.70 (Ø1/2) × 1
Method Flare
Pre-charge length (Total)
m
30
Maximum length (Total) 50
Maximum length (Each) 25
Minimum length (Total) 10
Minimum length (Each) 2.5
Maximum height difference between outdoor
unit and each indoor units.
15
Maximum height difference between indoor
units.
10
Operation range
Cooling
°C
-10 to 46
Heating -15 to 24
Drain hose
Material PP
Tip diameter mm Ø13.0 (I.D.), Ø16.0 to Ø16.8 (O.D.)
NOTES:
• Specifications are based on the following conditions:
– Power source of specifications: 230 V
– Pipe length: 5 m, Height difference: 0 m [Outdoor unit—Indoor unit]
– Cooling: Indoor temperature of 27.0 °CDB/19.0 °CWB, and outdoor temperature of 35 °CDB/24.0 °CWB.
– Heating: Indoor temperature of 20.0 °CDB/15.0 °CWB, and outdoor temperature of 7.0 °CDB/6.0 °CWB.
• *1: Maximum operating current is the total current of the indoor unit and the outdoor unit.
• *2: Sound pressure level
– Measured values in manufacturer’s anechoic chamber.
– Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.
• For other combination, refer to the combination table.
• The protective function might work when using it outside the operation range.
• This data is based on EN 14511 standard.
1-2. Outdoor unit
- (01-21) - 1. Specifications
GENERAL
INFORMATION
GENERAL
INFORMATION
To Next Page
Loading...
Need help?
General
