Need help?Do you have a question about the Fujitsu AUXB24GALH and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | AUXB24GALH |
| Category | Air Conditioner |
| Language | English |
Lists critical items to check before and after applying power, covering installation, safety, and system status verification.
Describes test run control parameters like operating modes, fan speed, temperature indication, and air direction settings.
Explains compressor operation, stop conditions, capacity control, and speed ranges for start, stop, and continuous operation.
Details fan control for cooling, heating, and low noise modes, including fan steps, switching conditions, and sound reduction.
Describes expansion valve control for EEV1 and EEV2, covering initialization, operation, and special control modes.
Explains special operations like oil recovery, pre-heat, and defrost control for system maintenance and protection.
Lists protective functions, including temperature, high/low pressure, and abnormal protections for safe system behavior.
Covers fan control for indoor units, including speed settings, AUTO position logic, and operation during DRY mode.
Explains master control functions: operation mode, priority modes, auto changeover, and COOL/HEAT positions.
Provides instructions for adjusting air circulation direction (vertical/horizontal louvers) and swing operations using the remote control.
Details electronic expansion valve control for indoor units, including initialization, operation, and special controls.
Explains drain pump operation, covering starting, stopping, and float switch functions for indoor units.
Details abnormal operation indicators for indoor and outdoor units, listing error contents, flashing patterns, and troubleshooting references.
To Next Page
