Exterior Part name Model name Summary
External
Connect Kit
UTY-XWZXZ5
Required when external device is
connected.
External
Connect Kit
UTY-XWZXZG
Use to connect with various peripheral
devices and air conditioner PCB.
For control output port.
Air Outlet
Shutter Plate
UTR-YDZB
Installed at the air outlet when 3-
directions mode is performed.
Fresh Air Intake
Kit
UTZ-VXAA
By attaching Fresh Air Intake Kit to the
indoor unit, it can be taken in fresh air
of up to 10% of “high” air volume of
the indoor unit.
Insulation for
High Humidity
UTZ-KXGC
Install when the under-roof condition is
expected to be the humidity of over
80% and the temperature of over
30 °C.
Half Concealed
Kit
UTR-STA
Used for the indoor unit installing of
half concealed.
Communication
Kit
UTY-TWBXF2
Use to connect with optional devices
and air conditioner PCB.
External Input
and Output PCB
UTY-XCSX
Use to connect with external devices
and air conditioner PCB.
External Input
and Output PCB
UTY-XCSXZ2
Use to connect with external devices
and air conditioner PCB.
Communication
Kit
UTY-TWRXZ3
Use to connect Non-polar 2-core wired
remote controller.
Communication
Kit
UTY-TWRXZ2
Use to connect Non-polar 2-core wired
remote controller.
6-1. Indoor unit
- (02-112) - 6. Optional parts
TECHNICAL DATA
AND PARTS LIST
TECHNICAL DATA
AND PARTS LIST
To Next Page
Loading...
Need help?
General
