Need help?Do you have a question about the Fujitsu AUXG18LRLB and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 5.2 kW |
| Heating Capacity | 6.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.6 |
| Refrigerant | R32 |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Outdoor Unit Noise Level | 50 dB(A) |
| Power Supply | 230 V, 50 Hz |
Highlights key features and energy efficiency class of the cassette type indoor units.
Details the features, performance, and comfort control capabilities of the wired remote controller.
Provides detailed technical specifications for specific indoor unit models (AUXG18LRLB, AUXG24LRLB).
Illustrates physical dimensions, mounting, and piping/drain positions for indoor units.
Presents the electrical wiring diagram for various indoor unit models.
Lists cooling and heating capacity data based on indoor and outdoor temperatures.
Details airflow velocity distributions for different models and outlet directions.
Shows noise level curves for various models across different octave bands.
Outlines the types of protection and their activation/reset conditions for indoor units.
Explains how to use external signals for operation, stop, and status monitoring.
Describes how to adjust various functions using indoor unit components or the remote controller.
Covers address settings and master/slave configurations for touch panel remote controllers.
Lists available optional controllers and accessories for the indoor units.
Provides detailed technical specifications for outdoor units (AOYG18LBCA, AOYG24LBCA).
Illustrates physical dimensions and installation layouts for outdoor units.
Depicts the refrigerant flow diagram for various outdoor unit models.
Shows electrical wiring diagrams for different outdoor unit models.
Provides tables for adjusting capacity based on pipe length and height difference.
Details the refrigerant additional charge calculation based on total pipe length.
Lists airflow rates (m³/h, l/s, CFM) for cooling and heating modes for each model.
Presents noise level curves for outdoor units across different frequency bands.
Specifies electrical requirements, operating currents, and wiring specifications.
Details safety protection mechanisms for outdoor units like fuses and thermal programs.
Explains external input functions like low noise and peak cut modes for specific models.
Describes local setting procedures using switch buttons on the outdoor unit's control PCB.
To Next Page