Need help?Do you have a question about the Fujitsu CELVIN NAS QE805 and is the answer not in the manual?
General| Category | Data storage |
|---|---|
| Product Type | NAS |
| Form Factor | Desktop |
| RAID Levels | 0, 1, 5, 6, 10, JBOD |
| Network Interface | 2 x Gigabit Ethernet |
| eSATA Ports | 1 |
| Model | CELVIN NAS QE805 |
| Supported Drives | SATA |
| Processor | Intel Celeron |
| RAM | 2 GB |
| Operating System | Linux-based NAS OS |
Key safety precautions for operating the NAS device to prevent risks.
Steps for initial NAS installation and setup.
Explanation of various RAID configurations (Single Disk, JBOD, RAID 0-10).
How to access and use the NAS web administration interface.
Using Qsync for cloud-based file synchronization.
Setting up the Surveillance Station for IP camera monitoring.
Procedures for updating the NAS system firmware.
Using Fujitsu Finder to perform firmware updates.
How to reset admin password and network settings.
Procedures for dealing with hard disk malfunctions or failures.
Solutions for incorrect RAID configurations and error messages.
Recovering RAID volumes from disconnections or drive removals.
To Next Page
