Brief description of main bo ard Engl
ish - 3
Brief description of mainboar
d
Information about boards
Be sure to observe the following for boards with ESD:
• You must always discharge static build up (e.g. by touching a grounded object)
before working with the board.
• The equipment and tools you use must be free of static charge.
• Remove the power plug from the mains supply before inserting or removing
boards.
• Always ho ld boards by their edges.
• Never touch c onnector pins or conductors on the board.
An overview of the features is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. D epending on the confi guration,
your mainboard will be equipped with or provide support for certain features.
This manual describes the most important properties of this mainboard.
Fujitsu Technology Solutions 17
To Next Page
Loading...
