Fujitsu D2759 - Page 18

18 Technical Manual D2759 (TX150 S7)
Overview Features
Internal connectors
– 1x SATA MLC connector (4 ports)
– 2x SATA connectors
–1x I
2
C signaling connector
– 1x ATX power connector 24 pin (12V, -12V, 5V, 3.3V and 5V auxiliary)
– 1x ATX power connector 8 pin (2x 12V)
– 1x PC98 connector
– 1x front panel connector
– 1x triple USB connector type C (for USB connectors on the front side)
– 2x USB connectors for optical drives
– 1x USB connector for internal USB stick (USB stick and USB Flash Module
cannot be used simultaneously)
– 1x connector for USB Flash Module (optional)
– 1x connector for TPM (optional)
– 1x connector for second serial connector (COM2) in PCI slot
– 1x connector for system fan (4 pin)
– 1x intrusion connector
– 1x connector for HDD activity LED
– 1x connector for RESET switch
External connectors
– front side:
– 3x USB 2.0 connectors with 480 Mbits/s
– rear side:
– 1x serial connector (COM1)
– 4x USB 2.0 connectors with 480 Mbits/s
– 1x video connector (VGA)
– 2x RJ45 LAN connectors
PCI slots
– 5 x PCI-Express slots:
– 2x PCIe x8 slots (Gen2)
– 2x PCIe x1 slots (Gen1)
– 1x PCIe x4 slot (Gen1)
– 1 x PCI slot (32 bit / 33 MHz)