Fujitsu ECLIPSE DA7232 - EA2212 2;1 Channel Power Amplifier; Specifications for EA3532, EA3422, EA2212

1911
Integrated Amplifier Bridge
Specifications
EA3532 EA3422 EA2212
13.8V POWER SUPPLY
Max. Power Output 105W × 4ch (2Ω )
123W × 4ch (2Ω ) 105W × 2ch (2Ω )
230W × 1ch (Subwoofer)
2 Ω 60W × 2ch (Front), 60W × 2ch (Rear)
70W × 4ch 70W × 2ch
120W × 1ch,
4 Ω (Subwoofer)
Power Output
4
Ω 40W × 2ch (Front)
(RMS Continuous Power)
40W × 2ch (Rear) 50W × 4ch 50W × 2ch
120W × 1ch (Subwoofer)
4 Ω bridged 120W × 2 (Front/Rear) 140W × 2ch 140W × 1ch
THD
@ 2 Ω stereo 0.008% 0.008% 0.008%
@ 4 Ω stereo 0.004% 0.004% 0.004%
(Rated Power)
@ 4 Ω bridged 0.008% 0.008% 0.008%
Signal to Noise (A-weighted 4 Ω ) 105dB 105dB 105dB
Frequency Response @ 4Ω stereo 20Hz ~ 20kHz + 0, –0.7 +0, –0.7 +0, – 0.7
Crosstalk 4 Ω –70dB –70dB – 70dB
Slew Rate 10V/µs 10V/µs 10V/µs
Damping Factor @ 60Hz > 200 > 200 > 200
Input Sensitivity (pre out) 0.2 ~ 5V 0.2 ~ 5V 0.2 ~ 5V
Input Sensitivity (amp out) 0.4 ~ 10V 0.4 ~ 10V 0.4 ~ 10V
Max. Current Consumption ( 4 Ω ) 50 amps 50 amps 25 amps
CHANNELFLEX CROSSOVER
High-Pass
12dB/octave
50 ~ 200Hz (Front)
50 ~ 200Hz 120Hz
Frequency Range 120Hz (Rear)
Low-Pass
12dB/octave 50 ~ 200Hz (Subwoofer) 90Hz (Fixed) 50 ~ 200Hz
Frequency Range
Bass Boost (45Hz) — 0 ~ 9dB ON/OFF 9dB
Subsonic Frequency Range 12dB/octave 20Hz 20Hz 20Hz
Dimensions (W × H × D) 15.75˝ × 2.04˝ × 10.82˝ 10.82˝ × 1.97˝ × 10.82˝ 8.85˝ × 1.97˝ × 10.82˝
Designed, engineered and made in the U.S.A.
HIGH PASS
0
+ 9
–12
– 6
20 2005045 120 20k1k 10k
BASS BOOST
ON/OFF
0
+ 9
–12
– 6
20 2005045 120 20k1k 10k
0
+ 9
–12
– 6
20 2005045 120 20k1k 10k
LOW PASS
EA2212
2/1 Channel Power Amplifier
with ChannelFlex Crossover plus Subsonic Filter
210 W
11
BP1502
Premium Amplifier Bridge
1902
Premium Amplifier Bridge