Fujitsu ECLIPSE DA7232 - Specifications for 34230 and PA5532

8
Specifications
34230 PA5532
13.8V POWER SUPPLY
Max. Power Output 550W × 2ch (4Ω ) 125 W × 4ch (2Ω ), 460 W × 1ch (SW, 2Ω )
2Ω — 70W × 4ch, 280W × 1ch
Power Output 4Ω 370W × 2ch 50W × 4ch, 200W × 1ch
4Ω bridged — 140W × 2ch
THD @ Rated Power @ 2Ω stereo 0.008% 0.008%
@ 4Ω stereo 0.004% 0.004%
@ 4Ω bridged 0.008% 0.008%
Signal to Noise 105dB 105dB
Freq. Response +0, –0.7 +0, –0.7
Crosstalk –75dB –75dB
Slew Rate 10Vµs 10Vµs
Damping Factor @ 60Hz >200 >200
Input Sensitivity 0.2 ~ 8V 0.2 ~ 8V
Max. Current Consumption (4Ω) 100 amps 70 amps
CHANNELFLEX CROSSOVER
Amp Crossover High Pass 12dB/octave — 50 ~ 200Hz (Front)
120Hz (Rear)
Low Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz
Pre-Out Crossover High Pass 12dB/octave 50 ~ 200Hz —
Low Pass 12dB/octave ——
Subsonic Filter Freq. Range 0-60Hz 20Hz (Fix)
18dB/octave 12dB/octave
Slope
(Fix) (Fix)
Dimensions (W × H × D) 18.80˝ × 2.05˝ × 11.85˝ 18.80˝ × 2.05˝ × 11.85˝
Designed, engineered and made in the U.S.A.
HIGH PASS
20k
20k
50
200
50
200
20k
60
AMPLIFER CROSSOVER OPTION :
PREOUT CROSSOVER OPTION :
–18
–12
– 6
0
–18
–12
– 6
0
–18
–12
– 6
0
LOW PASS
SUBSONIC FILTER
PA5532
5/3 Channel Power Amplifier
with ChannelFlex Crossover plus Subsonic Filter
960W
34230
2 Channel Power Amplifier
with ChannelFlex Crossover plus Subsonic Filter
20k
50
200
HIGH PASSFRONT
AMPLIFER CROSSOVER OPTION :
–18
–12
– 6
0
20k
120
HIGH PASSREAR
–18
–12
– 6
0
20k
50
200
LOW PASSREAR
–18
–12
– 6
0
SUBSONIC FILTER 24dB/oct
–18
–12
– 6
0
20k20