Fujitsu F9600 F9600c - Busy Tone; Service Tone; Reorder Tone; Ringback Tone

4
Busy Tone There are two types of busy tones in the F9600/
F9600c system:
•A standard busy tone (a repetitive .5 second
tone followed by a .5 second pause) means
that the dialed number is busy.
•A distinctive busy tone (a repetitive .2
second tone followed by a .1 second pause)
means that the dialed number is busy.
However, you can camp-on or override the
busy number, depending on your extension's
class of service.
Service Tone Service tone indicates that you have successfully
accessed a feature. This tone is a series of three
short beeps.
Reorder Tone Reorder tone is a fast busy tone that indicates one
of the following conditions:
• Your extension's class of service does not
include the requested feature.
• You have dialed an incorrect code or number.
• Your extension was left off-hook after the
other party hung up.
• The line (privacy) you share with a Digital
Telephone is busy when you lift the handset.
Ringback Tone Ringback tone is the ringing tone you hear after
you have dialed another extension or outside line.
It consists of one second of ringing followed by two
seconds of silence.
Call Waiting
Tone
(Extension
Call)
Call waiting tone (extension call) is one short beep
heard during your conversation that indicates
another call is waiting.
Call Waiting
Tone (Outside
Call)
Call waiting tone (outside call) is two short beeps
to indicate that there is an outside call waiting.