40
DAY/NIGHT CHANGE
The Day/Night Change feature is used to change the Day/Night mode
access from an extension. This feature can be used only when there is
no Attendant Console in the system tenant.
To change the mode to Night mode:
Action Results
1. Lift handset. You hear dial tone.
2. Dial the night mode code You hear service tone.
_____.
3. Hang up.
To change the mode to Day mode:
Action Results
1. Lift handset. You hear dial tone.
2. Dial the day mode code You hear service tone.
_____.
3. Hang up.
NOTE
Changing to the Night Mode while in Night Mode or changing to the
Day Mode while in Day Mode is acceptable.
To Next Page
Loading...