Fujitsu fi-7300NX Consumable Replacement And Cleaning Instructions

Cleaning the Outside of the Scanner
 Scanner
The scanner including the ADF paper chute (feeder) and the stacker should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe.
 Touch screen
To avoid the surface of the touch screen becoming dirty, clean it regularly by gently wiping dirt and dust off with
a soft, dry cloth.
Clean the touch screen with care. Do not rub or tap the surface with hard objects as doing so may damage the
surface.
ATTENTION
 To avoid deformation and discoloration, never use paint thinner or any other organic solvents.
 Be careful not to let any moisture or water inside the scanner during cleaning.
 It may take a long time to dry if an excessive amount of Cleaner F1/mild detergent is used. Use only a small
amount. Wipe off the cleaner completely to leave no residue on the cleaned parts.
ATTENTION
Do not wipe the touch screen with a damp cloth.
Dust on the surface may become stuck between the touch screen and the scanner, causing the touch screen to
malfunction.

Fujitsu fi-7300NX Specifications

General

Brand	Fujitsu
Model	fi-7300NX
Category	Scanner
Language	English