To Next PageTo Next PageWhat to do if my Fujitsu FI-6140 does not turn on?
If your Fujitsu Scanner doesn't turn on, try the following: First, push the power button. Second, ensure the AC cable and adapter are correctly connected. If it still fails, disconnect and reconnect the AC cable and adapter. As an additional measure, try pushing the power button again after Windows has completely started.
Why is my Fujitsu FI-6140 Scanner not starting the scan?
If scanning doesn't start on your Fujitsu Scanner, ensure the document is correctly loaded on the ADF paper chute and that the ADF is completely closed. Also, verify that the cable is correctly connected, paying attention to the hub's power supply if you're using a USB hub. Check that the SCSI ID is correctly set using the SCSI ID switch on the rear of the scanner. If the Function Number Display shows an alarm or error, turn the power off and on again. If the alarm persists, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.
What to do if scanning does not start on my Fujitsu Scanner?
If scanning doesn't start on your Fujitsu Scanner, ensure the document is correctly loaded on the ADF paper chute and that the ADF is completely closed. Also, verify the cable is correctly connected, paying attention to the hub's power supply if a USB hub is in use. You may also try turning the power off and on again.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Input color depth | 24 bit |
| Maximum scan size | 52 x 74 mm |
| Scanner type | Flatbed & ADF scanner |
| Sensor type | CCD |
| I/O ports | -USB |
| Scan media weight | 80 g/m² |
| Weight (imperial) | 9.24 lbs |
| Dimensions (WxDxH) | 301 x 160 x 158 mm |
| Standard media sizes | -A4 |
| Sustainability certificates | ENERGY STAR |
| Power supply | 42 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Weight | 4200 g |
|---|
Ensures safe operation regarding AC cables, grounding, and handling.
Advises on safe operation concerning odors, damage, liquids, and environment.
Explains the functions of the operator panel buttons and display indications.
Details procedures for turning the scanner on, off, and managing power control.
Instructions for loading documents onto the ADF and Flatbed.
Outlines the fundamental steps required to perform a scan.
Explains how to use the FUJITSU TWAIN 32 and ISIS scanner drivers.
Guides on launching, driver selection, and scanning with ScandAll PRO.
Explains how to save scanned images as PDF files using ScandAll PRO or Acrobat.
Lists recommended cleaning materials and their recommended cleaning cycles.
Details the procedure for cleaning the Automatic Document Feeder components.
Shows specifications and standard replacement cycles for consumables.
Explains how to check and reset counters for consumables like rollers.
Provides instructions for safely removing jammed documents from the ADF.
Explains error codes and indicators shown on the scanner's operator panel.
Guides for resolving common scanning problems and symptoms.
Lists essential checks and information needed before contacting support.
Outlines conditions for detecting multifeeds based on overlap, length, or both.
Details configuration options available in the Software Operation Panel.
Sets up multifeed detection options and ranges for the ADF.
