To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu fi-6670 and is the answer not in the manual?
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Grayscale levels | 256 |
| Input color depth | 24 bit |
| Maximum scan size | 279.4 x 431.8 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CCD |
| Maximum duty cycle | 450000 pages per month |
| Auto document feeder (ADF) input capacity | 200 sheets |
| Bundled software | Adobe Acrobat Standard, Kofax VRS Professional + Bar Code, ScandAll PRO, QuickScan Pro |
| Power requirements | AC 100 - 240V, 50 / 60 Hz |
| Maximum scan area (ADF) (imperial) | 11 x 17 \ |
| Minimum scan area (Auto Document Feeder) | 2 x 3 \ |
| Power consumption (standby) | 6 W |
| Power consumption (typical) | 216 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 299.72 mm |
|---|---|
| Width | 431.8 mm |
| Weight | 17009.7 g |
Details the three scanner models covered in the manual.
Lists all manuals included with the scanner for reference.
Explains the meaning of symbols used throughout the manual.
Defines naming conventions for scanners and software products.
Warns about mercury content in lamps and safe handling procedures.
Describes warning labels on the scanner and their meaning.
Explains symbols indicating potential hazards and required precautions.
Details critical warnings about power cables, grounding, and device usage.
Explains the major features of the scanner, including speed and multifeed detection.
Identifies and describes the function of the scanner's various parts.
Provides step-by-step instructions for powering the scanner on and off.
Provides instructions for loading documents into the Automatic Document Feeder.
Specifies acceptable document sizes and paper quality for ADF scanning.
Explains how to configure settings using the TWAIN scanner driver.
Explains how to configure settings using the ISIS scanner driver.
Covers scanning various document types like duplex, large-size, and different widths.
Details advanced scanning features like color dropout and blank page skipping.
Explains settings for automatically correcting skewed images and page orientations.
Lists recommended cleaning materials and locations needing cleaning.
Provides instructions for cleaning the Automatic Document Feeder.
Lists consumables and their standard replacement cycles.
Step-by-step guide for replacing the pick rollers.
Step-by-step guide for replacing the brake roller.
Provides procedures for removing jammed documents from the ADF.
Explains error codes displayed on the operator panel and their meanings.
Lists information to gather before contacting support.
Instructions for launching the Software Operation Panel.
Details the various settings configurable via the Software Operation Panel.
Explains how to configure multifeed detection methods and ranges.
Provides detailed technical specifications for the scanner models.
Lists installation space requirements, power, and environmental conditions.
Provides instructions for uninstalling bundled software.
