Fujitsu fi-6670 - Operational; Settings; Shooting; Trouble

Chapter 4 Various Documents
84
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
5 Under [Select Current Image Setting], select the side(s) to
scan.
Configure scan settings for both color and black-and-white
documents in the [TWAIN Driver (32)] dialog box.
You need to pre-configure settings for [Color/Grayscale] detection as
well as those for [Binary] detection.
6 In the [TWAIN Driver] dialog box, click the [OK] button.
⇒ Changes made are saved.
7 From ScandAll PRO, perform a scan.
For how to perform a scan, refer to "ScandAll PRO V2.0 User's
Guide".
When the document is recognized as a color/grayscale
document, it is output in the mode selected under [Image
Mode] in the [TWAIN Driver (32)] dialog box.