Fujitsu fi-6670 User Manual

Chapter 6 Consumables
103
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
1 Remove documents (if any) from the ADF Paper Chute.
2 Pushing the ADF Open Buttons, lift open the ADF.
3 Remove the ADF Paper Chute.
4 Remove the Pick Rollers (x2) from the scanner.
1 Open the Pick Roller Cover.
6.2 Replacing the Pick Rollers
The scanner has two Pick Rollers. Be sure to replace both of
them at the same time.
Be careful, the ADF may close and pinch your
fingers.
ADF Open Button
CAUTION

Fujitsu fi-6670 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	256
Input color depth	24 bit
Maximum scan size	279.4 x 431.8 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
Maximum duty cycle	450000 pages per month
Auto document feeder (ADF) input capacity	200 sheets
Bundled software	Adobe Acrobat Standard, Kofax VRS Professional + Bar Code, ScandAll PRO, QuickScan Pro
Power requirements	AC 100 - 240V, 50 / 60 Hz
Maximum scan area (ADF) (imperial)	11 x 17 \
Minimum scan area (Auto Document Feeder)	2 x 3 \
Power consumption (standby)	6 W
Power consumption (typical)	216 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	299.72 mm
Width	431.8 mm
Weight	17009.7 g