To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu 6240 - fi - Document Scanner and is the answer not in the manual?
Step-by-step guide to turn the scanner on and its initialization status.
Instructions for properly loading documents into the Automatic Document Feeder.
Outlines the fundamental steps required to scan documents with the scanner.
Explains how to utilize the TWAIN 32 and ISIS scanner drivers.
Guides on using ScandAll PRO for scanning and creating document images.
Details how to perform duplex scanning using ScandAll PRO.
Guides on saving scanned images into PDF format via software.
Configures the scanner to automatically detect and skip blank pages.
Explains multifeed detection settings to prevent scanning errors.
Describes the Automatic Deskew function for correcting document skew.
Configures scanner buttons to initiate scanning with linked applications.
Utilizes patch codes for automatic job separation and file organization.
Uses barcode recognition for job separation and folder naming.
Details the procedure for cleaning various components within the ADF.
Explains how to check page counts and reset consumable counters.
Step-by-step guide for removing and installing the brake roller.
Provides procedures for safely removing jammed documents from the scanner.
Lists error indications on the operator panel and their remedies.
Offers solutions for typical problems encountered during scanning operations.
Specifies the conditions required for various multifeed detection modes.
Explains how to access and use the Software Operation Panel for settings.
Explains how to configure methods and ranges for multifeed detection.
General