fi-6140 / fi-6240 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
8.13 Paper Protection Setting
The Paper Protection function detects any folded paper or nonstandard thin paper in the document and stops the scanning.
Configure the settings for the Page Protection as follows:
1. Start up the Software Operation Panel.
See Section "8.1 Scanner Settings."
2. Select [Device Setting 2] from left side list in the window, and select [Paper Protection] from its
lower level.
3. Select whether to enable or disable the Paper Protection function.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_13_01.htm (1 of 2)9/28/2007 2:39:04 PM
To Next Page
Loading...
