To Next PageTo Next PageWhat to do if scanning does not start on Fujitsu Scanner?
If scanning does not start on your Fujitsu Scanner, make sure the document is correctly loaded on the ADF paper chute and that the ADF is completely closed. Also, ensure the cable is correctly connected, paying attention to the hub's power supply if you're using a USB hub. Turn the power off and on again.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Input color depth | 24 bit |
| Maximum scan size | 210 x 297 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CCD |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Scan media weight | 210 g/m² |
| Weight (imperial) | 9.24 lbs |
| Dimensions (WxDxH) | 301 x 160 x 158 mm |
| Standard media sizes | -A4 -A8 |
| Compatible operating systems | -TWAIN -ISIS ScandAll PRO -Adobe Acrobat -QuickScan Pro -VRS |
| Sustainability certificates | ENERGY STAR |
| Power supply | 38 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Weight | 4200 g |
|---|
Details compliance with FCC rules and Canadian digital apparatus regulations.
Provides manufacturer details and certifications like CE and EN standards.
Confirms the product meets ENERGY STAR® guidelines for energy efficiency.
Advises against use in high-safety applications and provides mercury handling information.
Lists registered trademarks and explains how they are indicated within the manual.
Provides the address and contact details for PFU LIMITED, the manufacturer.
Disclaims PFU LIMITED's liability for damages arising from product use or manual errors.
Explains warning indications, symbols, and general safety precautions in the manual.
Verifying all items are present in the scanner package upon opening.
Detailed identification and explanation of scanner components and their purposes.
Explains the buttons, display, and indicators on the scanner's operator panel.
Step-by-step guide on powering the scanner on and off, including power control settings.
Instructions on properly placing documents into the Automatic Document Feeder for scanning.
Procedure for loading documents onto the flatbed scanner bed for scanning.
Outlines the fundamental steps involved in scanning documents using the scanner.
Guide on utilizing the FUJITSU TWAIN 32 and ISIS scanner drivers for scanning operations.
Explains how to use the ScandAll PRO software for scanning and managing scanned images.
Procedure for performing duplex scanning to capture both sides of a document.
Instructions for scanning bound documents like books using the flatbed scanner.
Method for scanning documents that exceed standard paper sizes using the flatbed.
Guidance on scanning documents of varying widths together using the ADF.
Instructions for scanning documents that exceed standard A4 or Letter page length.
Explains how to save scanned images as PDF files using ScandAll PRO or Adobe Acrobat.
How to remove a specific color from scanned images, useful for isolating text.
Configuration for automatically detecting and removing blank pages during scanning.
Settings to configure the scanner's multifeed detection feature to prevent paper jams.
How to enable automatic detection and correction of skewed document images.
Process for scanning a document to produce multiple image outputs simultaneously.
Setting up automatic detection of document color or monochrome for appropriate image output.
Method to horizontally split a scanned page image into two separate images.
How to automatically remove punch hole marks from scanned document images.
Configuring scanner buttons to initiate batch scans with specific profiles.
Utilizing patch codes to automatically separate scanned documents into different folders.
Using barcode recognition for job separation and automatic folder naming of scanned documents.
How to configure the Intelligent Multifeed function to bypass errors on specific document types.
Lists recommended cleaning materials and the cycle for cleaning various scanner parts.
Step-by-step instructions for cleaning the flatbed scanner glass and cover.
Procedure for cleaning the Automatic Document Feeder components, including rollers and glass.
Details the scanner's consumables and their recommended replacement cycles.
Guide on checking and resetting the counters for scanner consumables.
Instructions on how to safely remove and replace the brake roller.
Step-by-step guide for removing and installing a new pick roller.
Procedures for safely removing jammed documents from the scanner's ADF.
Explains various error codes and messages displayed on the operator panel and their remedies.
A guide to diagnosing and resolving common scanning issues and symptoms.
Checklist of information to gather before contacting customer support for assistance.
Information on locating and understanding the labels on the scanner.
Specifies the range of document sizes supported by the scanner's ADF.
Details recommended document types, thickness, and precautions for scanning.
Information on the maximum number of sheets that can be loaded into the ADF based on paper weight.
Identifies areas on documents that should not have punched holes to avoid scanner issues.
Outlines the conditions and modes for detecting multifeeds in the ADF.
Introduction to configuring scanner settings using the Software Operation Panel.
How to configure the scanner's automatic power saving mode settings.
Adjusting image position and scale for scanned images that are misaligned or elongated.
Configuring the scanner's multifeed detection modes and ranges.
Function to fill the edges of scanned images for a cleaner appearance.
How to remove specific colors from scanned images, such as background colors.
Enabling Pre-Pick to shorten the time interval between scanning documents.
Configuring intelligent multifeed settings to bypass errors for specific document types.
Setting the number of times the scanner attempts to feed paper when a pick error occurs.
Setting thresholds for consumable replacement warnings based on page counts.
Configuring the timeout period for manual feeding operations.
Options for controlling the scanner's power state via buttons, AC cable, or USB connection.
Provides detailed technical specifications for the scanner model.
Details installation requirements, dimensions, weight, and environmental conditions.
Shows the physical dimensions of the scanner with diagrams.
Steps to configure computer settings for linking scanner buttons to applications.
How to configure the scanner's buttons to initiate scanning or linked applications.
