Fujitsu FI-6130 User Manual

8.6 Dropout Color
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
8.6 Dropout Color
By using the “Dropout Color” function, you can scan documents with the specified color removed from the light’s
three primary colors, or red, green, blue. (This function is available for the binary black and white setting as well as
the grayscale setting.)
For example, when scanning the document containing black letters each with a green frame, you can scan only the black
part of letters by specifying green to be dropped out.
Configure the settings for the Dropout Color as follows:
1. Start up the Software Operation Panel.
See Section "8.1 Scanner Settings."
2. Select [Device Setting 2] from left side list in the window, and select [Dropout color] from its lower
level.
3. Select a color to drop out.
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/08/c08_06_01.htm (1/2) [2008/10/30 15:15:07]

Fujitsu FI-6130 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
Auto document feeder (ADF) input capacity	50 sheets
Scan media weight	210 g/m²
Weight (imperial)	9.24 lbs
Dimensions (WxDxH)	301 x 160 x 158 mm
Standard media sizes	-A4 -A8
Compatible operating systems	-TWAIN -ISIS ScandAll PRO -Adobe Acrobat -QuickScan Pro -VRS
Sustainability certificates	ENERGY STAR
Power supply	38 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	4200 g