The provided document describes the cleaning and maintenance procedures for the Fujitsu fi-6140C scanner. This scanner is designed for efficient document processing, and regular cleaning is crucial for maintaining its performance and extending its lifespan.
Function Description:
The Fujitsu fi-6140C is an image scanner, likely designed for office environments to digitize various types of documents. While the specific scanning capabilities (e.g., simplex/duplex, color/monochrome, speed) are not detailed in this document, the presence of multiple roller types (Brake, Pick, Eject, Feed, Plastic) and ADF (Automatic Document Feeder) glass surfaces indicates its ability to handle stacks of paper for automated scanning. The mention of "ADF Open Lever" confirms its use of an Automatic Document Feeder, which is a common feature in document scanners for batch processing.
Important Technical Specifications (Inferred from Consumables):
The document lists specific part numbers for key consumables, which are essential for the scanner's operation and are subject to wear and tear. These include:
- Brake Roller: Part Number PA03540-0001. Brake rollers are critical for separating individual sheets of paper from a stack, preventing multiple sheets from being fed at once.
- Pick Roller: Part Number PA03450-0002. Pick rollers are responsible for picking up the top sheet of paper from the input tray and feeding it into the scanner's paper path.
- Cleaning Materials: Part Number SC-CLE-KIT1. This indicates that a specific cleaning kit is recommended for maintaining the scanner, suggesting specialized cleaning agents or tools are required.
Usage Features (Related to Maintenance):
The document outlines specific steps for accessing and cleaning various components, which implies certain operational features:
- ADF Access: The scanner features an ADF that can be opened by pulling a cover open lever, providing access to internal components for cleaning.
- Roller Rotation for Cleaning: For cleaning the Eject and Feed Rollers, the scanner needs to be turned ON. A special mode is activated by simultaneously holding down the "Send to" and "Scan" buttons on the operator panel. This causes the rollers to rotate slowly, allowing for thorough cleaning with a moistened cleaning paper. The document even specifies that "7 presses of the 'Send to' and 'Scan' buttons make the rollers rotate one full turn," indicating a controlled rotation mechanism for maintenance.
- Operator Panel Interaction: The cleaning process involves interacting with the scanner's operator panel, specifically the "Send to" and "Scan" buttons, to initiate roller rotation. The "Function Number Display" showing "1" through "9" is also mentioned as a prerequisite for opening the ADF during this specific cleaning procedure.
Maintenance Features:
The primary focus of this document is on the maintenance of the Fujitsu fi-6140C scanner, specifically cleaning procedures. It provides a detailed guide on which components to clean, how often, and with what materials.
- Recommended Cleaning Frequency: It is strongly recommended to clean certain items "EVERY 1,000 SCANS." This highlights the importance of regular preventative maintenance to ensure optimal performance and prevent issues like paper jams or poor image quality.
- Components to Clean (Turn Scanner OFF):
- Brake Rollers (x 2): These should be cleaned lightly with cleaning paper moistened with F1 Cleaner, taking care not to scratch the surface.
- ADF Glass Surfaces (x 2): These are critical for image quality and should be cleaned lightly.
- Pick Roller (x 2): Similar to brake rollers, these should be cleaned lightly with moistened cleaning paper.
- Plastic Rollers (x 4): These should be cleaned lightly while rotating them with a finger, taking care not to roughen the surface.
- Components to Clean (Turn Scanner ON):
- Eject Rollers (x 2): These rollers, responsible for ejecting scanned documents, should be cleaned lightly, taking care not to roughen the surface.
- Feed Rollers (x 2): These rollers, which feed documents through the scanner, also require light cleaning, taking care not to roughen the surface.
- Special Cleaning Mode: For the Eject and Feed Rollers, a specific procedure is required:
- Ensure the scanner is ON and the Function Number Display shows "1" through "9."
- Open the ADF.
- Simultaneously hold down the "Send to" and "Scan" buttons on the operator panel. This will cause the rollers to rotate slowly.
- Hold a soft, dry, moistened cleaning paper against the surface of the rotating rollers to clean them lightly.
- As a guideline, 7 presses of the "Send to" and "Scan" buttons will make the rollers rotate one full turn, ensuring comprehensive cleaning.
- Cleaning Materials: The document explicitly mentions "F1 Cleaner" as the cleaning agent to be used with cleaning paper. This suggests that specific, non-abrasive cleaning solutions are necessary to avoid damaging the scanner's components.
- Safety Precaution: The instruction to "Turn the Scanner OFF" for certain cleaning tasks emphasizes safety and prevents accidental operation during manual cleaning of internal parts.
In summary, the Fujitsu fi-6140C scanner is a document imaging device that requires diligent and specific maintenance, particularly cleaning of its various rollers and glass surfaces, to ensure consistent, high-quality performance. The manual provides clear, step-by-step instructions, including special operational modes for cleaning, and highlights the importance of using recommended cleaning materials and adhering to a regular cleaning schedule.
To Next Page
Need help?
General
