Fujitsu FI-6140c User Manual

Turn the Scanner ON while cleaning the following locations
Using cleaning paper moistened with F1 Cleaner
December 2007
Cleaning Instructions for fi-6140C ScannerFujitsu Europe LImited
For further information please refer to the
fi-6140C Image Scanner Operators Guide
which can be found on our Website:
www.fel.fujitsu.com/scanner
6
Clean lightly taking care not to roughen the surface.
Feed Rollers x 2
Open the ADF only if the Function Number Display is showing “1”
through “9”.
Simultaneously hold down the “Send to” and “Scan”
buttons on the operator panel. The rollers will start
to rotate slowly
Hold a soft dry, moistened cleaning paper against the
surface of the rotating rollers, lightly cleaning the
surface.
As a guideline, 7 presses of the “Send to” and
“Scan” buttons make the rollers rotate one full turn.
1
2
“Send to” Button “Scan” Button
2
3
4
1
5
Brake Rollers
Glass
Eject Rollers
Pick Rollers
Feed Rollers
6
Plastic
Rollers
5
Eject Rollers x 2

Fujitsu FI-6140c Specifications

General

Brand	Fujitsu
Model	FI-6140c
Category	Scanner
Language	English