Fujitsu FI-6130 - Basic Specifications

9.1 Basic Specifications
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
9.1 Basic Specifications
Item Specification Notice
Scanner type
fi-6130 fi-6230
-
ADF (Automatic Document
Feeder)
ADF + Flatbed
Image sensor
fi-6130 fi-6230
-
Color CCD x 2 (Front,
Back)
Color CCD x 3 (Front, Back, Flatbed)
Light source
fi-6130 fi-6230
-
White cold cathode
fluorescent lamp:
x2 (Front, Back)
White cold cathode fluorescent
lamp: x3 (Front, Back, Flatbed)
Scanning
area
Minimum A8 (Portrait) (Note (*1))
ADF
127 g/m
2
to
210 g/m
2
(34 to 56 lb) paper
Maximum
ADF: A4/letter or legal
(Long page scanning: 216 x 864 mm or 8.50 x 34.00 in,
or 210 x 3048 mm or 8.27 x 120.00 in)
Flatbed (fi-6230): 216 x 297 mm (8.50 x 11.69 in)
(Note (*2))
Paper weight
41 g/m
2
to 210 g/m
2
(11 to 56 lb)
(Note (*3))
Scanning
speed
(A4/
letter
portrait)
(Note
(*4))
Binary
(monochrome)
Simplex: 40 sheets/min.
Duplex: 80 sides/min.
200 dpi
Grayscale
Color
Simplex: 30 sheets/min.
Duplex: 60 sides/min.
Binary
(monochrome)
300 dpi
Grayscale
Color
Capacity of ADF 50 sheets
A4/letter, 80 g/
m
2
(20 lb) (Note
(*5))
Optical resolution 600 dpi -
Output
resolution
Binary
(monochrome)
50 to 600 dpi, 1200 dpi (*6)
Scalable in 1 dpi
increments
Grayscale 50 to 600 dpi, 1200 dpi (*6)
Scalable in 1 dpi
increments
Color 50 to 600 dpi, 1200 dpi (*6)
Scalable in 1 dpi
increments
Grayscale level 8 bits per color Internal 10 bits
Halftone patterns Dither / error diffusion -
Interface
USB2.0 / 1.1 (Note (*7))
B type
Other function
JPEG compression
-
Imprinter Port (fi-6130 only) (Note (*8))
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/09/c09_01_01.htm (1/2) [2008/10/30 15:15:18]