fi-6140 / fi-6240 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
8.10 Life Counter Setting
This counter specifies the page count to ask the operator to replace the consumables. When the page count exceeds the value
specified here, the background color of the counter becomes yellow (see Section "
5.2 How to Check and Reset the
Consumables Counters"), or a message (see the replacement message) appears.
Configure the settings for the life counter as follows.
1. Start up the Software Operation Panel.
See Section "8.1 Scanner Settings."
2. Select [Device Setting 2] from left side list in the window, and select [Useful life counter] from its
lower level.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_10_01.htm (1 of 2)9/28/2007 2:39:00 PM