Fujitsu 6240 - fi - Document Scanner User Manual

3.18 Not Detecting Multifeed for Fixed Format
fi-6140 / fi-6240 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
3.18 Not Detecting Multifeed for Fixed Format
When sheets with glued photographs or sticky notes are scanned, the scanner can accidentally detect a multifeed error, and
scanning is interrupted. This section explains "Intelligent Multifeed Function", or a resolution function that eliminates such a
problem (hereinafter referred to as "this function").
This function has one manual mode and two automatic modes as follows:
Intelligent Multifeed Function
There are three modes; select one according to your needs. Select a mode by using the Software Operation Panel.
Item in Software Operation
Panel
Method to bypass
Multifeed
Applicable case Comments
Manual mode
(Bypass by front panel
button)
When a Multifeed error
occurs, press [Send to]
to eject sheet in the
scanner's transport
path. Examine the last
sheet scanned.If no
paper is glued on the
ejected sheet, return
the sheet to the Hopper
and press the [Scan]
button.
If glued paper is
present on the ejected
sheet, return the sheet
to the Hopper, press
the [Function] button
once (Slow Blink rate of
the function number
display will change to
Fast Blink rate) and
press the [Scan]
button. The scanner
will not check for a
Multifeed error on the
first sheet being
scanned. The following
sheets are checked for
Multifeed errors with
the already-existing
Use this mode when
you want to continue
scan-ning, while
checking for glued
paper every time a
multifeed error is
detected.
Pages scanned before
errors are sent to
memory.
Extraneous images may
be generated during a
Multifeed error.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_18_01.htm (1 of 7)9/28/2007 2:39:17 PM

Fujitsu 6240 - fi - Document Scanner Specifications

General

Brand	Fujitsu
Model	6240 - fi - Document Scanner
Category	Scanner
Language	English