Fujitsu fi-6670

Chapter 8 Operational Settings
165
Index
Appendix
Introduction
Glossary
Contents
TOP
Loading
Documents
Scan
Parameters
Various
Documents
Daily Care
Trouble-
shooting
Operational
Settings
Consumables
Scanner
Overview
Timeout for Manual Feeding
[Manual-feed timeout]
In Manual Feeding mode where you manually load documents
sheet by sheet, you can scan multiple batches of documents
continuously as a single file when you load the second stack
of document before the timeout time after loading the first
batch.
When the time has elapsed, the scanning terminates automat-
ically, canceling manual feeding.
You can cancel the Manual Feeding mode immediately by
pressing the [Send to] button within the timeout period speci-
fied.
1 Start up the Software Operation Panel.
Refer to "8.1 Starting Up the Software Operation Panel" (on page
134).
2 From the tree listing on the left, select [Device Setting 2]
D [Manual-feed timeout].
3 Select whether to enable or disable [Manual feed timeout].
To enable the timeout setting, select the timeout period for manual
feeding until loading the next document after the previous one.
8.6 Settings Related to Wait Time
When [Manual feed timeout] is enabled, the scanner
waits for the document to be loaded within the specified
timeout period, even if scanning starts with no document
loaded in the ADF Paper Chute.