Why is water being produced from the outdoor unit of my Fujitsu Inverter Halcyon 9374379392-04 Air Conditioner?
During heating operation, water may be produced from the outdoor unit of your Fujitsu Air Conditioner due to the automatic defrosting operation.
How to fix the flashing ECONOMY Indicator on my Fujitsu Air Conditioner?
If the ECONOMY Indicator flashes on your Fujitsu Air Conditioner, clean the filter and then turn the ECONOMY Indicator off.
What to do if thermo sensor display on the remote controller of my Fujitsu Air Conditioner is flashing?
The room temperature sensor of your Fujitsu Air Conditioner may be malfunctioning. Please consult authorized service personnel.
Why is my Fujitsu Air Conditioner making noise?
You may hear noises from your Fujitsu Air Conditioner due to the following reasons: * The sound of water flowing in the air conditioner’s piping may be heard during operation and immediately after stopping the unit. * Noise may be particularly noticeable for about 2 to 3 minutes after starting operation (sound of coolant flowing). * During heating, a sizzling sound may be heard occasionally. This sound is produced by the automatic defrosting operation.
Why doesn't my Fujitsu Air Conditioner operate immediately?
Your Fujitsu Air Conditioner may not operate immediately because: * If the unit is stopped and then immediately started again, the compressor will not operate for about 3 minutes to prevent fuse blowouts. * Whenever the electrical breaker is turned off then on again, the protection circuit will operate for about 3 minutes, preventing unit operation during that period.
Why does my Fujitsu Air Conditioner smell?
A smell may be emitted from the indoor unit of your Fujitsu Air Conditioner as a result of room smells (furniture, tobacco, etc.) that have been taken into the indoor unit.
General| Brand | Fujitsu |
|---|---|
| Model | Inverter Halcyon 9374379392-04 |
| Category | Air Conditioner |
| Language | English |
Defines DANGER, WARNING, and CAUTION levels for safe operation and potential hazards.
Details INVERTER, ECONOMY, SWING, SUPER QUIET, and AUTO CHANGEOVER operations.
Step-by-step guide to setting the current day and time on the remote controller.
Instructions on how to start and stop the air conditioner using the START/STOP button.
How to select operation modes (AUTO, COOL, DRY, FAN, HEAT) and set temperature/fan speed.
Instructions for setting timers to automatically start or stop the unit.
Guide to programming daily operating times for the entire week.
Procedures for starting, canceling, and managing weekly timer settings.
How to set specific temperatures for different times of the week.
Lists common symptoms like no operation, noise, smells, and their potential causes.
Essential checks for unit non-operation or reduced cooling/heating performance.
To Next Page