What to do if my Fujitsu Laptop cannot be started?
If your Fujitsu Laptop cannot be started, verify that the power adapter is properly connected. Then, switch the notebook on. Also ensure the battery is correctly installed in its compartment and charged, or insert a charged battery.
What to do if my Fujitsu LIFEBOOK AH512 suddenly stops working?
If your Fujitsu Laptop stops working, first ensure it is not in energy-saving mode and leave energy saving mode. If that's not the case, close the application program that may be causing the malfunction, or restart the notebook by restarting the operating system or switching the device off and back on again. Also ensure the battery is charged, or insert a charged battery, or connect the mains adapter to the notebook.
How to fix 'System CMOS checksum bad' error on Fujitsu LIFEBOOK AH512 Laptop?
If you encounter the error message 'System CMOS checksum bad - default configuration used' on your Fujitsu Laptop, switch the notebook off and then on again. Press the F2 function key to access the BIOS Setup. In the BIOS Setup, select the Exit menu, choose 'Load Setup Defaults', and then select OK and press Enter.
Why radio connection to network does not work on Fujitsu LIFEBOOK AH512 Laptop?
If the radio connection to a network on your Fujitsu Laptop does not work, switch the radio component on (see "Switching the wireless components on and off", Page 39). If the wireless component is enabled but the wireless connection still doesn't work, check whether the radio connection is switched on via the software. Further information on using the radio component can be found in the help files.
How to fix 'Keyboard controller error' on Fujitsu LIFEBOOK AH512 Laptop?
If you encounter the error message 'Keyboard controller error' on your Fujitsu Laptop, switch the notebook off with the ON/OFF switch. Wait 3 - 5 seconds and switch it on again.
How to fix 'Operating system not found' error on Fujitsu LIFEBOOK AH512?
If your Fujitsu Laptop displays the error message 'Operating system not found', check in the BIOS Setup to ensure that your hard disk has been set correctly and verify that the operating system is installed on the corresponding drive.
Why is my Fujitsu LIFEBOOK AH512 not printing?
If the printer is not printing, make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). Check that the data cable connecting the notebook to the printer is properly connected. Also, verify whether the correct printer driver is loaded (refer to the printer documentation).
How to troubleshoot 'Extended memory failed' on Fujitsu LIFEBOOK AH512?
If you receive the error message 'Extended memory failed at offset: xxxx Failing Bits: zzzz zzzz' on your Fujitsu Laptop, check whether the additional memory module has been inserted correctly.
How to resolve 'Failure Fixed Disk n' error on Fujitsu LIFEBOOK AH512 Laptop?
If you encounter the error message 'Failure Fixed Disk n' on your Fujitsu Laptop, start the BIOS Setup (Primary Master submenu) and select the correct settings.
How to correct the date and time on a Fujitsu Laptop?
If the date or time is incorrect on your Fujitsu Laptop, you can set the date and time in the main menu using the BIOS-Setup-Utility. For further assistance, contact your sales outlet or our Hotline/Service Desk.
General| Display Size | 15.6 inches |
|---|---|
| Display Resolution | 1366 x 768 pixels |
| Graphics | Intel HD Graphics 4000 |
| Battery | 6-cell Lithium-ion |
| Wireless | Wi-Fi 802.11 b/g/n |
| Processor | Intel Core i5-3210M |
| RAM | Up to 8 GB DDR3 |
| Storage | 500 GB HDD |
| Operating System | Windows 8 |
| Weight | 2.5 kg |
| Dimensions | 378 x 252 x 35.7 mm (14.88 x 9.92 x 1.41 inches) |
| Ports | USB 3.0, USB 2.0, HDMI, VGA, Ethernet |
| Optical Drive | DVD Super Multi |
Essential safety precautions for operating the notebook.
Steps for switching on the notebook for the first time and initial software installation.
Instructions on how to switch the notebook on and off properly.
Guidelines for charging, caring for, and maintaining the notebook's battery.
Explanation of how to use power-management features to save energy.
Configuring supervisor and user passwords in the BIOS Setup Utility for enhanced security.
Changing, removing passwords, and enabling password protection for system boot.
Steps for activating and deactivating hard disk password protection.
Important safety precautions when removing or installing components.
Detailed steps for removing and installing memory modules.
Step-by-step guide for removing and installing the hard disk drive.
Detailed steps for safely removing the hard disk drive from its compartment.
Detailed steps for safely installing a hard disk drive into its compartment.
How to start the BIOS Setup Utility and navigate through its menus.
Options for saving or discarding changes and exiting the BIOS Setup Utility.
Procedure for restoring the hard disk and troubleshooting date/time errors.
Troubleshooting steps for LCD screen issues and external monitor connectivity.
Solutions for issues related to the notebook not starting or stopping operation.
Description and resolution for common error messages displayed by the system.
To Next Page