Technical Procedure
LifeBook E8310
Wireless Card Replacement
ESD Precautions are required when working on this LifeBook computer.
Make sure the LifeBook is turned off before beginning this procedure.
1.
Turn the LifeBook over. Release and
remove the battery.
2.
Remove 3 screws from inside the Battery
Bay. Remove one screw from the rear of
the Lower Cover.
3.
Turn the LifeBook up and use a plastic pry
tool to release the Hinge Cover tabs on
both sides.
4.
Open the LifeBook. Use a plastic pry tool
to remove the Hinge Cover.
To Next Page
Need help?
General