Fujitsu PA03740-K010 - Checking Sheet Counters; Start Software Operation Panel; Select Device Setting; Check Consumable Counters

FI‐7600/FI‐7700 C ONSUMABLE R EPLACEMENTAND C LEANING I NSTRUCTIONS


CG00002‐296501


Checkin
g
andresettin
g
sheetcounters
Checkingthesheetcounters
Thestatusofeachconsumablecanbe
viewedtodeterminewhentoreplaceor
cleantheconsumables.
Thecolorofthecountergraduallychanges
whenareplacementforaconsumableis
neededorwhencleaningisneeded.
Thecolorofeachcounterchangesas
follows:
 Brake roller counter/pick roller counter
These counters turn light yellow when the sheet
count after the consumable replacement reaches
95% of the value specified in
"Replacement Cycle of Consumables
[Life Counter Alarm Setting]"
in the Software Operation Panel, and turn yellow
when the sheet count reaches 100%
.

Counter after cleaning
This counter turns yellow when the sheet count
after cleaning reaches the value specified in
"Scanner Cleaning Cycle [Cleaning Cycle]" in the
Software Operation Panel.

Ink counter
This counter turns yellow when the amount of
remaining ink reaches below 33% (only displayed
when the imprinter is installed).



1. StartuptheSoftwareOperationPanel
2. Fromthelistingontheleft,select
[DeviceSetting]

Inthiswindow,youcancheckthefollowing
items:

