[MODE]
Input mode selector button
Power indicator lamp
Remote control signal receiver
Input mode selector button
[MODE]
Switches between picture input modes.
VOL + button
VOL - button
Adjusts the sound volume.
Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
ON/OFF button
Turns the power "ON" and "OFF (standby state)".
(Right section)
Control Panel (Right side of display)
DISPLAY SECTION – FRONT
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving
Flashing (red): Malfunction (Flashes differently depending
function) mode ON
on the type of malfunction.)
Receives signals from the remote control.
PART NAMES AND FUNCTIONS
- 12 -
To Next Page
Loading...
