Fujitsu PRIMERGY TX100 S1 - Documentation Overview

System configurator and order-information guide
Start PRIMERGY TX100 S1
PRIMERGY TX100 S1 Status 2010-06-30
Section
I
Basic unit
System unit consisting of:
* Housing including standard power supply (no redundancy)
* Imprint of MAC Adress on system label and delivery note as standard
Systemboard with:
* 4 PCI expansion slots:
1x PCIe x4 (wired x1), notched (posible to plug x16 cards)
1x PCIe x8; fits for lp and fh formfactor cards
1x PCIe x8 (wired x4)
1x long 32Bit / 33MHz (3.3V); fits for lp and fh formfactor cards
* 4 memory slots for up to 8GB (PC2 6400) registered DDR II RAM (ECC), max. 2GB modul per slot
* 2 bays 5.25" for accessible drives
* 2 or 4 LFF (3.5") bays 1" high for no hot plug SATA HD (depending on base unit)
* SATA with up to 4 HDD's over ICH-9R (Chipset)
* ATI ES1000 32MB
* Intel 10/100/1000 Mb/s (82566DM) on-board LAN
Cables included in Base Unit:
1. SATA cabel for CD/DVD
2. 2 or 4 x SATA cabel in basic unit (depending on base unit)
PS/2 mouse
ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates
External Interfaces:
1x RS-232-C (serial, 9 pins)
1x Centronics (parallel, 25 pins, EPP/ECP compatible) optional
1x keyboard (PS/2)
1x mouse (PS/2)
1x VGA (15 pins)
10x USB 2.0 ( 2x frontside, 6x on rearside, 2x released internal USB Interfaces for backup devices)
1x LAN RJ45
A
Fujitsu Technology Solutions x86 PRIMERGY Server 6 of 13